What Should You Do When the Engine Warning Light Comes On?

When the engine warning light comes on, check whether it's steady or flashing and whether your car is running normally. Stop safely and switch off the engine if the light keeps flashing, the engine shakes, or you notice overheating, smoke or a red oil-pressure warning. If the light stays steady with no other symptoms, avoid hard acceleration and arrange a diagnostic check promptly.

What does the engine warning light mean?

The engine-shaped symbol, sometimes labelled “check engine” or “service engine soon”, usually means the engine management system has detected a fault. The problem may involve fuel delivery, ignition, emissions controls or the sensors that help your engine run correctly.

The onboard diagnostic system, known as OBD, monitors emissions-related components and stores fault information when it detects a problem. The US Environmental Protection Agency explains how these systems help identify faults that can increase vehicle emissions.

The light doesn't tell you which part has failed or how much repairs might cost. A loose fuel cap can trigger it on some cars, but so can an ignition misfire or a problem with the catalytic converter, which treats harmful exhaust gases.

Check the symbol against your owner's manual. You'll need to respond differently to an oil-pressure light, coolant-temperature warning or service reminder. The engine light normally comes on briefly when you switch on the ignition. If it stays on after you start the engine or comes on while you're driving, you need to investigate.

What should you do immediately?

Keep your attention on the road rather than trying to inspect the dashboard closely while you're moving. Ease off the accelerator, avoid sudden manoeuvres and find somewhere safe to check your car.

  1. Check whether the light is steady or flashing, and read any accompanying dashboard message.
  2. Look for other warnings, particularly oil pressure and coolant temperature.
  3. Check for shaking, loss of power, unusual noises, smoke or a fuel smell.
  4. Pull over safely if your car runs badly or another warning tells you to stop.
  5. Consult your owner's manual before deciding whether to continue or call for assistance.

If you stop because of serious symptoms, switch the engine off once you've parked safely. Don't leave it idling to see whether the fault clears, and don't repeatedly restart it. If you can't reach a safe stopping place, focus on getting out of moving traffic without stopping suddenly.

Is a flashing engine warning light more serious?

On many petrol cars, a flashing check-engine light indicates an active misfire severe enough to risk damaging the catalytic converter. A misfire means one or more cylinders aren't burning the fuel mixture properly, allowing unburnt fuel to reach the exhaust.

Reduce the load on your engine immediately. If the flashing continues, or the engine shakes or loses power, stop safely, switch off the engine and call for roadside assistance. If you continue driving, you could turn an ignition or fuelling fault into a more expensive exhaust-system repair.

A steady light generally gives you more time to investigate, but it doesn't guarantee that your car is safe to drive. Warning lights work differently between vehicles, especially if your car has separate diesel, particulate-filter or powertrain symbols. Follow any instruction to stop in the dashboard message or your owner's manual.

Can you drive with a steady engine warning light?

A short, gentle drive to a nearby repairer may be reasonable if the light is steady, your engine runs smoothly, the temperature is normal and there are no other warnings. Check your owner's manual first, and call the repairer or roadside assistance if you're uncertain.

Avoid high engine speeds, hard acceleration, towing and heavy loads. Don't begin a long trip or continue using your car for days simply because it still feels normal. You may notice little change in performance with some emissions faults.

Stop if the light starts flashing or you notice any new symptoms. Significant power loss can also make joining traffic or crossing a junction unsafe, even if your engine is still running. In that situation, arrange recovery rather than trying to drive to a workshop.

What can you check yourself?

Once you've parked safely and switched off the engine, you can make a few basic checks. Keep your hands away from hot components, belts and cooling fans, which may start unexpectedly.

  • Check that you've fitted the fuel cap correctly, if your car has one, especially if the warning appeared after refuelling.
  • Check the engine oil level using the procedure in your owner's manual; don't overfill it.
  • Check the coolant reservoir level only when the engine is cool, and never open a hot cooling-system cap.
  • Record when the light appeared, any recent refuelling or repairs, and changes in starting, idling or acceleration.
  • Photograph the warning symbol and dashboard message while you're parked.

If you tighten a loose fuel cap, the light may not go out immediately because the system needs to repeat its checks. Don't assume the cap caused the warning if the light stays on or your car develops symptoms. Take immediate action if you see a red oil-pressure warning, even if the dipstick shows a normal level.

How do technicians diagnose an engine warning light?

A technician connects a diagnostic scan tool to retrieve stored trouble codes and relevant operating data. They may then check wiring, inspect hoses, test ignition components or compare sensor readings to find the cause.

A fault code is a clue, not an instruction to replace a particular part. For example, a code reporting a lean fuel mixture can result from an air leak, inadequate fuel delivery or an incorrect sensor reading. If you replace the sensor named in the code without testing it, you could waste money.

Ask for the codes, the test results that support the diagnosis and an estimate before authorising repairs. You can use a basic code reader to record information, but it can't tell you whether your vehicle is safe to drive.

Don't clear codes first or disconnect the battery just to turn the light off. You could erase useful diagnostic information and reset emissions-readiness checks without fixing the fault. After the repair, the technician should check that they've fixed the problem and explain whether the light will go out automatically or they'll need to reset it with a scan tool.

Sources